Titanium Grade 2 Machinability
Back To Titanium Machinability
As a family, titanium and its alloys Titanium Grade 2 and Titanium Grade 5 have built a persona as a nightmare to machine. This is just not the situation. Experienced operators have compared its qualities to those found in 316 stainless steels. . For Titanium Grade 2, recommended practice includes high coolant flow (to offset the material's low thermal conductivity), slow speeds and generally high feed rates. Tooling should be tungsten carbide designations C1-C4 or cobalt type high speed tools.
Applications
-
Orthopedic applications, such as implants and prosthesis
-
Airframe and aircraft engine parts
-
Marine chemical parts
-
Condenser tubing
-
Heat exchangers
Chemical Composition %
| Grade | N | C | H | Fe | O | Residuals *** | Residuals *** | Ti |
| Titanium Grade 2 | 0.03 max | 0.08 max | 0.015 max | 0.30 max | 0.25 max | 0.1 max | 0.4 max | Balance |
*** Need not be reported.
*** A residual is an element present in a metal or an alloy in small quantities and is inherent to the manufacturing process but not added intentionally. In titanium these elements include aluminium, vanadium, tin, chromium, molybdenum, niobium, zirconium, hafnium, bismuth, ruthenium, palladium, yttrium, copper, silicon, cobalt, tantalum, nickel, boron, manganese, and tungsten.
Mechanical Properties
| Tensile Strength (ksi) | 0.2% Yield Strength (ksi) | Elongation% in 2 inches |
| 130 | 120 | 10 |
Environment
Safety
CSR